Grainger CEME Seminars

Back to Listing

Switched-Doubly-Fed Machine Drive For High Power Applications

Event Type
Grainger CEME
2017 ECEB
Feb 27, 2017   4:00 - 5:00 pm  
Asst. Prof. Arijit Banerjee





Converting electricity to mechanical motion is a foundation of modern civilization. A controllable “knob” is often necessary for these electro-mechanical energy conversion systems to achieve an adjustable motion or a process control. An energy-efficient approach to accomplish this “knob” is through variable-speed drives (VSD), which are power-electronic-based converters with an associated control operating as an interface between the electrical machine and the electrical source. These drives are not only critical in a wide range of applications including industrial processes, electric propulsion systems, and power generation plants but also becoming increasingly relevant for optimizing energy consumption. For example, a motor without a VSD running at fixed speed can potentially waste 30% to 80% of energy in mechanical throttles located upstream from the compressor or downstream from the pump. In addition to being a controllable knob for energy conversion, these VSDs are configurable to support the electrical source, e.g., the electric grid, through appropriate reactive power support and controllable power factor -- a vital feature required for the future electric grid comprising a more complex electrical network of energy flow.

However, merely 13% of global loads in mega-watt class high-power applications are driven by VSDs. At these higher power levels, the VSD design is significantly challenging due to the limited available device ratings and allowable switching frequency leading to design trade-offs among size, efficiency, performance, reliability, and cost. In this talk, I will be talking about a switched-doubly-fed machine (switched-DFM) drive that uses a parallel architecture for electromechanical energy conversion to reduce the required power processing capability of the power-electronic converter by two-thirds while operating seamlessly over a wide speed range. Additionally, the proposed architecture provides an exciting opportunity for supporting the electric grid with reactive power not only through the VSD but also using the electrical machine. The approach confronts the challenges of high power electromechanical energy conversion from the perspective of electromagnetics, power electronics, circuit design, embedded computing, and control to push the trade-off boundary for the VSD to be physically small, efficient, reliable, flexible, inexpensive, and electric-grid friendly.

The talk will highlight a design procedure for the proposed switched-DFM drive based on a required drive-torque-speed capability, a control architecture that can achieve seamless performance across the entire speed range from the perspective of the electrical grid and the mechanical load, multiple transfer switch circuit topologies enabling uninterrupted on-the-fly reconfiguration of the DFM, and steady-state and dynamic performance comparison between different switched-DFM drive topologies. A lab-scale prototype of the proposed switched-DFM drive emulating an entire power system from generation to consumption is designed and built to demonstrate seamless, wide-speed range, and four-quadrant operation of the drive. The proposed methodologies can be used to create efficient, cost-effective, and sustainable solutions for high power electromechanical energy conversion systems.

link for robots only