College of Engineering, All Events

Back to Listing

Hassel and Marianne Ledbetter MatSE Colloquium - “High energy x-ray microscopy insights into additive manufacturing”

Event Type
Seminar/Symposium
Sponsor
Materials Science and Engineering Department
Virtual
wifi event
Date
Feb 7, 2022   4:00 pm  
Speaker
Anthony Rollett, Department of Materials Science and Engineering, Carnegie Mellon University
Views
73
Originating Calendar
MatSE Colloquium Calendar

“High energy x-ray microscopy insights into additive manufacturing”

 

Additive manufacturing, aka 3D printing is a relatively new technology that has given rise to the “maker culture” and an intense interest in design. That has carried over into metals additive, which has jumped almost immediately into manufacturing of actual parts in a variety of alloys. In doing so it has liberated thinking about part design albeit within certain constraints and complex components have been deployed that were previously inaccessible, e.g., high temperature heat exchangers. Nothing is ever as simple as it seems, however, and the reliability of parts that must carry load depends on the internal (micro-)structure, especially with respect to fatigue loading. This motivates detailed study of all aspects of materials microstructure ranging from defect structures to strain, all of which is ideally suited to the use of intense sources of high energy x-rays as only third generation light sources can deliver. Computed tomography (CT) has revealed the presence of porosity in all additively manufactured metals examined to date and confirmed that appropriate process control can limit it. CT has also provided data on surface condition that we are trying to link to fatigue performance.  High speed radiography reveals even more crucial details of how laser light generates vapor cavities that can deposit voids past a critical instability point. “Hot” cracking has been imaged as it happens during the solidification process, which offers the possibility finding printing recipes for alloys previously considered off-limits to 3D printing. High speed, high resolution diffraction in stainless steel, alloy 718 and Ti-6Al-4V reveals unexpected solidification and precipitation sequences. Diffraction microscopy reveals the highly strained nature of printed metals and how microstructure and internal strain state evolves during subsequent annealing. In all of these activities, machine learning is an invaluable tool and aid to the researcher.

link for robots only